RIVET REMOVAL TOOL CRACKED

It consists of a drill bit that matches the size of the mandrel and a collar that fits over the rivet head. The basic design of the rivet removal tool is simple.

The principle of rivet removal is similar to rivet installation in reverse, and you can use a rivet removal tool for your power drill or as part of your rivet installation tool.

Using a Tool for Rivet RemovalĪ tool for rivet removal is specifically designed to cleanly remove rivet heads without damaging the drill hole so you can replace the rivet. If you need to replace a rivet with an equally strong or stronger joint or if you are removing multiple rivets, it pays to use a rivet removal tool. The approach is the same as with a grinder, but you cut the head off manually instead of with a power tool.Įach of these methods is time-consuming and messy. Remove it manually.įor small disassembly jobs, you can always use a hammer and a chisel. Using a grinder is sure to mar the surface of the workpiece. This approach is usually fast and can be useful if you are disassembling something for disposal or recycling and don’t intend to reuse the pieces. Rather than drilling the rivet heads out, you can always cut them off using a grinder. Round-headed rivets, for example, make it harder to center the drill bit on the rivet head for a clean drill out. The type of rivet also may make it difficult to use a power drill. However, using a handheld power drill is less accurate than using a rivet removal tool, and this technique could result in a misshapen hole or damage to the workpiece. Using a power drill and a drill bit that matches the size of the rivet mandrel, you can drill the rivets out manually. If you don’t have a rivet tool, there are three basic techniques you can use: 1. There are different approaches to rivet removal, and each will yield a different result, which makes a difference if you want to reuse the pre-drilled rivet holes or if you have a large number of rivets to remove. If you use the wrong tools or are careless, you will have to replace the rivet with a larger size, which may weaken the strength of the joint as well as affecting the appearance. When a rivet has to be replaced, you want to make a neat job of rivet removal so the pre-drilled hole doesn’t change shape or size. When you have to remove a rivet, it pays to use the right rivet removal tool.

RIVET REMOVAL TOOL CRACKED

Maybe a rivet was installed incorrectly or cracked during installation, or perhaps the rivet has started to corrode and needs to be replaced. There is increasing Health and safety concerns about the high Hand-Arm Vibrations (HAVS) caused by these operations.Rivets are designed to provide a permanent joint, but sometimes they have to be removed. Stage 1 using a chisel head to cut off the rivet head, and Stage 2, using a round punch to attempt to hammer out the shaft of the rivet. Rivet busters are Pneumatic air hammer chisels which use a heavy duty percussion action to punch or cut construction materialsįor removing old rivets this is typically done in 2 stages. Reducing the use of dangerous Rivet Busters ( also known as Rivet bursters & Pneumatic Hammers) Impact Reamers do not have a torque kick-back which is a hazard with some power tools and air tools Products such as Impact Reamers can be used in Impact Wrenches providing a safety improvement. This gives effective results in these tight working areas Holemaker Technology have developed innovative drilling tools to speed up rivet removal and rework/replace connection holes for new bolts.ĭue to the unique challenges of bridgeworks, the Versadrive range is becoming widely used as the patented hex shank system allows effective use in cordless, rotary, and impact power tools.

This is complicated by the original fabrication methods of hot rivets and multiple layers of plated steelworks Over time, steel bridges become corroded and need strengthening and repairs.

This range is developed to help fabricators and site workers get the best results in the time available We recognise there are a range of unique challenges for bridge works including tight access, corroded materials, and time pressure from possessions. Bridge strengthening and steelwork repair is an essential part of keeping transport flowing and keeping passengers safe

Rivet removal tool